is a novel, carbon barrel sleeve/barrel extension for sports air rifles.
The well-known and for years proven Starik-Carbon-tube is now also available for air rifles. In cooperation with world record holder Guy Starik, we have jointly developed a new type of running sleeve that has the following properties:
-Extension of the sight line up to the maximum permissible total system length of 850mm -easy clamp attachment with only one screw (leaves no quirks on the barrel !!) -stepless variation of the sight line by 10cm long dovetail bar for the grain tunnel -allows individual weight and balance variation due to very light construction -can have a positive effect on the shot pattern (depending on length and weight adjustment) -with Scatt dovetail bar for attaching a Scatt device -incl. 1 balance weight -attractive design
With more and more int. Top shooters are the tendency in freehand shooting to recognize that the barrel mouth is held rather lightly and the weights are rather attached backwards - over the center of gravity of the body. Therefore, this offers Air Rifle Tube the possibility to find the individual balance of your rifle from as little as 58 g.
As more and more sport shooters also use Scatt equipment for their training, the attached Scatt dovetail bar is used for faster and easier attachment of the Scatt sensor.
TEC-HRO tube-air can be mounted on barrels with an outer diameter of 19.5 - 20.0 mm (please check before ordering!)
Scope of delivery:
1x running sleeve 1x running weight 1x diopter increase 4 mm to compensate for the height (for diopters required)
Total length: 140 mm Weight without steel weight: approx. 58 g Weight of a running sleeve weight: approx. 30 g
the carbon tubes are not polished on the inside and therefore have traces caused by removing the "mandrel" during production. Tests have shown that this has no effect on shooting performance, however, because unlike the small bore barrel case, no powder residue... accumulates and causes a diameter... change. This work step was thus saved in order not to make the product more expensive.